Pallof Press

  • Abs
  • Chest
  • Shoulders
  • Triceps

EquipmentCable

Pallof Press demonstration
Front
Back
Main muscleAlso working

New to this

Your first pallof press

Three things to know before your first set of the pallof press.

What weight should I start with on the pallof press?

Start around 15 to 25 lb on the cable for 3 sets of 10 per side. The job is to stay still while the cable tries to twist you.

Set the handle at chest height, stand side-on to the machine and step out until the cable is tight. Press the handle straight out from your chest, hold for two seconds, and bring it back.

Move the pin down when 12 reps per side feel steady.

What usually goes wrong on the pallof press?

Your torso twists toward the machine. Brace your abs and keep your chest facing forward.

You stand too close. Step out until the cable pulls hard.

You lean away. Keep your feet shoulder width apart and your body upright.

If the cable is taken

A band anchored to a post works the same way. The plank and side plank train the same bracing without any equipment.

Updated

How to do it

  1. Connect a standard handle to a tower, and—if possible—position the cable to shoulder height. If not, a low pulley will suffice.

  2. With your side to the cable, grab the handle with both hands and step away from the tower. You should be approximately arm's length away from the pulley, with the tension of the weight on the cable.

  3. With your feet positioned hip-width apart and knees slightly bent, hold the cable to the middle of your chest. This will be your starting position.

  4. Press the cable away from your chest, fully extending both arms. You core should be tight and engaged.

  5. Hold the repetition for several seconds before returning to the starting position.

  6. At the conclusion of the set, repeat facing the other direction.